COASTAL PERFORMANCE COATINGS, INC.
PALM CITY, FLORIDA

facility and was designed and constructed to provide an exceptional level of quality and to handle the painting of products that other facilities cannot. We are able to paint almost any item, and our facility caters to and welcomes the Southeast’s finest aluminum railing manufacturers and architectural metal fabricators. . We also have a second track that can be used to coat products up to . We are the only facility in South and Central Florida specifically engineered to handle these products. uses a six stage, chrome phosphate conversion pretreatment process to ensure the highest quality finish. The product is first sprayed with a concentrated, acidic cleaner to clean, degrease and etch the surface. Then it is sprayed with a acidic treatment to deoxidize, de-smut, and further etch the surface to receive the coating. It is then rinsed with pure water treated through our reverse osmosis, ultraviolet, multi-stage filtration process. Then it is sealed with a chrome phosphate conversion coating to eliminate oxidation for optimal paint adhesion, with a final rinse of pure deionized water. The product then enters our unique drying oven that forces hot air from the bottom of the oven. The air is turned every six minutes in a convection process that allows consistent airflow over the entire product and prevents the heat from simply rising to the top of the oven. The automated line allows the product to remain untouched throughout the process, eliminating the possibility of contamination and non-adhesion of the paint. Once dried, the product continues to the spray booth. E.S.P. guns are used to coat the product. Coastal Powder Coatings, Inc. offers 24 standard colors and a virtually unlimited array of custom colors to suit any need. Our standard paints are super-durables with five year durability. In addition, we will offer high-performance fluoropolymer thermosetting resin coatings with 5-10 year durability, which are excellent for the . Coastal Powder Coatings, Inc. provides warranties at an additional cost. After coating, the product enters the baking oven, which is capable of heating to 500 F. Upon completion of the baking process, the painted product is wrapped for customer pickup. Instead of standard bubble-wrap, we use 3/16” foam to wrap the top cap so that damage will not occur in transit. Our hours of operation are 6:00 am to 5:30 pm. Please contact Frank Poma at 772-283-5311 for pricing or to schedule an onsite visit of our facilities. We look forward to providing your company with unparalleled service and quality for all your finish needs. is a thermosetting powder coating in which 100% of the resin system consists of fluorocarbon polymers that have been successfully used for more than 30 years in the architectural market. This superior product line consists of engineered formulations to exceed the performance and durability requirements of the top architectural specifications such as AAMA 2605-05 Voluntary Specifications Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels. COMPANY